HS-BLH-1RLY-P2.0 Eight-Key Instant Electric Water Heater PCBA
Developed for instant electric water heaters, this customizable eight-key PCBA supports 85–280 VAC input, 3.5–5.5 kW power settings, 30–55°C control, flow sensing, preset temperatures, automatic parameter memory, rapid stabilization, and multiple protection functions.
# HS-BLH-1RLY-P2.0 Eight-Key Instant Electric Water Heater PCBA
The HS-BLH-1RLY-P2.0 is a customizable instant electric water heater PCBA designed for residential and commercial point-of-use water-heating equipment. Combined with the XX-CN-13560-8KEY-XH3-C1.4 display board, it integrates eight-key touch operation, adjustable power settings, intelligent temperature regulation, water-flow sensing, setting memory, self-test control, and multiple protection functions.
Both the power board and display board use APT control ICs, providing a coordinated hardware platform for customized instant water heater applications.
## Wide-Voltage Power Supply Design
The standard switching power supply version supports an input voltage range of 85–280 VAC, making the controller suitable for markets with different mains voltage conditions. An optional transformer-based solution supporting 180–265 VAC is also available.
During internal sample verification, the switching power supply version operated continuously for eight hours at 280 VAC without abnormal behavior. The transformer version also completed an eight-hour continuous operation test at 265 VAC.
## Eight-Key Touch Interface
The display board features an eight-key touch interface with the following functions:
- Safety self-test
- Temperature decrease
- Temperature increase
- Power on/off
- Operating mode or power level selection
- 38°C preset temperature
- 42°C preset temperature
- Power-setting control
The touch keys can operate through a 4 mm glass panel or a 2 mm plastic panel. Pressing and holding the increase or decrease key for more than one second enables continuous adjustment. Each valid key operation is confirmed by an audible buzzer tone.
The dedicated safety self-test key gives appliance manufacturers an additional control option for product inspection and user safety verification.
## Adjustable Power Settings
The controller provides three configurable power settings:
- 3.5 kW
- 4.5 kW
- 5.5 kW
Holding the designated power-setting key for five seconds opens the power configuration menu. The selected setting is automatically saved after three seconds without key operation.
The final rated power depends on the complete appliance design, including the heating element, power components, wiring, terminals, water circuit, and heat-dissipation structure.
## Intelligent Display and Sleep Function
After power is applied, the buzzer sounds once and the display performs a one-second full-screen check. During operation, the screen can indicate:
- Actual outlet water temperature
- Selected temperature
- Water-flow status
- Intelligent constant-temperature status
- Heating status
- Excessive water-flow warning
When no water flow is detected, the display automatically enters sleep mode. A key press or detected water flow wakes the screen, helping reduce unnecessary display operation during standby.
Dynamic display elements indicate active heating, while static display elements indicate that heating has stopped.
## Constant-Temperature Control
The adjustable temperature range is 30–55°C. Dedicated 38°C and 42°C keys provide quick access to frequently used temperature settings.
A 50K NTC sensor is used for temperature detection. The control program supports automatic temperature learning, calibration, and parameter memory. It also stores the selected temperature and power setting after shutdown.
Under sample test conditions with a 26°C inlet temperature and flow rates of 1.5–3.0 L/min, the tested 30–48°C setpoints stabilized within 20 seconds after initial learning and calibration.
## Water-Flow Detection
The tested activation flow rate is 1.5 L/min, while the shutoff flow rate is 1.3 L/min. Heating operation is therefore coordinated with the detected water flow to reduce unintended heating without sufficient water circulation.
An excessive water-flow indicator is also included to help users identify operating conditions that may affect outlet temperature performance.
## Multiple Protection Functions
The instant electric water heater control board supports several fault-detection and protection functions, including:
- Over-temperature protection
- Leakage-current protection
- Inlet temperature sensor open-circuit detection
- Inlet temperature sensor short-circuit detection
- Outlet temperature sensor open-circuit detection
- Outlet temperature sensor short-circuit detection
- Power-board and display-board communication fault detection
- Audible fault warning
- Automatic or power-cycle recovery according to the fault type
When the detected temperature reaches 63°C or above, the controller stops heating and activates an alarm. Heating automatically resumes after the temperature decreases to 50°C.
The leakage detection range is 15–28 mA, with a measured sample value of 25 mA.
## Sample Reliability Verification
The sample completed several internal verification tests, including:
- Eight-hour continuous operation at 280 VAC
- Eight-hour testing at 65°C and 90% RH
- Complete-appliance dielectric testing at 1,800 V and 5 mA for one minute
- Fluorescent-lamp switching interference testing repeated 30 times
- Normal-temperature water testing
- Circulating-water testing
- Constant-temperature testing at different temperatures and flow rates
The specified PCBA operating environment is −15°C to 65°C with a relative humidity range of 10–95% RH.
## Application Scenarios
This eight-key instant electric water heater PCBA is suitable for:
- Instant electric shower heaters
- Wall-mounted electric water heaters
- Kitchen instant water heaters
- Washbasin water heaters
- Compact household hot-water appliances
- Commercial point-of-use water heaters
- Customized OEM and ODM water-heating equipment
## OEM and ODM PCBA Manufacturing
With 15 years of PCBA manufacturing and product development experience, SunSam provides hardware development, firmware programming, SMT assembly, wave soldering, display-board production, functional testing, traceability management, and volume manufacturing services.
The board dimensions, connectors, display icons, key layout, power settings, temperature range, protection thresholds, sensor logic, and control program can be customized according to the customer’s complete appliance design.
Phase I of TianfuLai International Industrial City, Rongui Town, Shunde District, Foshan City, Guangdong Province, China
Looking for a reliable PCBA supplier? Contact SUNSAM for customized PCBA heater, PCBA refrigeration and washing machine PCBA, free samples, and competitive wholesale pricing. Get a quick quotation today.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy